Authored by Bella Hood

The common problem and solutions for seamstresses


The uncooperative sewing machine is always a problem with seamstresses. They are causes of wasting all time and being late in the process. Although you are the passion seamstress, sometimes you feel sick due to the same problem. This post will provide you with some common problems and how to solve them. You can read Which Is The Most Easy To Use Sewing Machine For Beginners On The Market to find more information about sewing machine

1. Unthreaded Needle

One of the common problems is the thread gets out of needle without any control. It is very hard to put the thread into the needle hole. However, when the machine starts to work, the thread is got out of the needle aquatically. To solve this problem, seamstress should keep the button up, which is used to control the needle. Therefore, the thread will be adjusted and kept into the needle' hole. You just know the way to finish annoying issue.

One of the common problems is the thread gets out of needle without any control

2. Wavy Seams

There are 2 main reasons for this problem. Firstly, it has a problem with the sewing machine's setting. A seamstress should check and adjust the setting for each fabric or sewing style. Secondly, you forget to focus on the support of the dress. When you do not get enough support for the stretchy fabrics. Then, your seam will messy and wavy. You should have a better posture to get stronger support to the project.

3. Bobbins

For beginners, wasting time for adjusting bobbins is usual. This problem caused 2 reasons. The first reason is the plastic material. Plastic bobbins is not a good choice because it cannot maintain the tension for the machine in all the process. It has a big difference in quality between the plastic and metal bobbins. Second, the setting of the machine is not suitable for this process. The setting is not good enough to operate the process. In this case, you need to change the setting by reading the manual and chose the best setting for the machine.

4. Keep Breaking Thread

For all beginners, breaking thread is a problem which makes them feel annoyed and tired a lot. First, seamstress needs to check whether the thread suitable for the nature of the fabric. If the thread is too light it will break in the middle of the process. So, you need to insert it many times. With this problem, makes sure you always use the thread with high-quality and strong enough for the fabric. The setting of tension should be checked to have the flow of thread smother on the fabric. If you have the best inexpensive sewing machine for beginners, your work will become easier.

5. Sewing Machine Thumps and Clunks

This problem may happen for those who have less experience. It might sound weird when seamstress starts to run the machine. It like something is broken or stuck. This problem is not a big deal and each seamstress can handle it. This means you should clean and oil the sewing machine. You need to go through the manual the cleaning procedure part. Then, you will know how to clean and oil for your machine. The lint in the machine will make the performance of your machine decrease.

6. Decorative Stitches

You need to take a look at the manual to change the length and width for each decorative stitch

Sometimes, you can feel the decorative stitches aren't working well because you use the stitches without checking the width and length of the machine. Again, you need to take a look at the manual to change the length and width for each decorative stitch. It won't work until you set correct point. When you finish then check and complete your project with the best basic sewing machine. You can find your right machine in the link Have a nice day!

49 Bytes
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment